PX6000L1-050GI壓力變送器 美國omega
擴散型半導體壓力傳感器PX6000-I
擴散半導體壓力傳感器
高可靠性
長期穩定性
所有不銹鋼
真空范圍
5點NIST證書包括
應用
汽車試驗
研究與發展
工程測試與評估
生產試驗
飛行記錄器
發動機監控
地面支持設備
內置的溫度傳感器
OMEGA's PX6000 Series pressure transducers fit easily into many applications. These low-cost transducers are small and light, and mounting requires no bulky structures. Users can select from 3 electrical terminations and 6 pressure fittings. The sensor is a small [about 2.54 mm (0.1") square] silicon chip, with 4 diffused strain gages mounted in the stainless steel case. Laser-trimmed resistors provide temperature compensation and adjust zero balance and span. The 4 to 20 mA output easily interfaces with most control and data acquisition systems. The PX6000 uses solid state media isolation for improved reliability. Thin films of chemically inert materials are deposited or grown on the chip surface to provide electrical isolation between the sensor and pressure medium. The sensor is less sensitive to vibration and more dependable in high-shock environments because the films add no significant mass. Corrosion resistance is outstanding, and the isolation will remain effective because there are no gel or oil columns to deteriorate.
The PX6000 is also available in metric configurations, with G1/4 or G1/8 ports, and models from 0-1 to 0-25 bar pressure ranges. Please see the PXM6000 for complete details, or contact our Pressure department for more information..
SPECIFICATIONS
4 to 20 mA Models
Excitation: 12 to 40 Vdc unregulated
Output: 4 to 20 mA adjustable ±10% FS
Load Impedance (Max): 50 x (V - 10) Ω where V = supply voltage (40 Vdc max)
Zero Balance: 4 mA adjustable ±10% FS Dielectric Isolation Resistance: 100 MΩ minimum at 45 Vdc applied between the case or a conductive medium and the bridge circuit
Sensing Element: 4-active-arm bridge using a micromachined diffused silicon diaphragm sensor, thin-film media and dielectric isolation barriers
Temperature Sensor: Output resistance @ 24°C (75°F) 900 to 1500
Temperature Coefficient: 8% min, 10% max per 55.5°C (100°F)
Accuracy: Combined linearity, hysteresis and repeatability ≤±0.25% FS for all ranges
Operating Temp Range: -29° to 85°C (-20° to 185°F)
Compensated Temp Range: -29° to 85°C (-20° to 185°F)
Thermal Effects:
Span: ≤±0.02% of FS/°F.
Zero: ≤±0.02% of FS/°F
Vibration Sensitivity: At 20 g peak sinusoidal vibration from 10 Hz to 2000 Hz (?" D.A.), the output shall not exceed 0.04% FS/g for 15 psi range to 0.005% FS/g for 100 psi and above
Natural Frequency: Greater than 35 kHz for 100 psi and above
Shock: 100 g, 11 ms half sine wave without damage
Proof Pressure: 2 times rated pressure will not cause changes in performance beyond the specified tolerances
Burst Pressure: 3 times rated pressure for pressure ranges below 200 psi, or 2.5 times rated pressure for pressure ranges above 200 psi, will not cause rupture of the pressure sensor
Wetted Parts: 316 stainless steel, silicon, Pyrex? glass, epoxy, Kovar?
Electrical Connection: PTIH-10-6P (standard), 0.6 m (2') cable or 4-pin solder terminal header (optional)
Pressure Port: MS33656-4 male (std)
Optional: MS33649-4 female, ?-18 or 1?8-27 NPT male or female
Weight: 170 g (6 oz) typical
Mating Connector: PTS06A-10-6S (not included)
注釋: Metric Ranges Available - Consult Engineering
產品型號/產品描述
PX6000L1-30VACI 30-0 in-Hg Vacuum Range transducer with 4-20 mV output, PT1H-10-6P electrical connection and MS33656-4 Male Pressure Port
PX6000L1-015AI 15 psi Absolute Pressure transducer with 4-20 mA output, PT1H-10-6P electrical connection and MS33656-4 Male Pressure Port
PX6000L1-020AI 20 psi Absolute Pressure transducer with 4-20 mA output, PT1H-10-6P electrical connection and MS33656-4 Male Pressure Port
PX6000L1-050AI 50 psi Absolute Pressure transducer with 4-20 mA output, PT1H-10-6P electrical connection and MS33656-4 Male Pressure Port
PX6000L1-100AI 100 psi Absolute Pressure transducer with 4-20 mA output, PT1H-10-6P electrical connection and MS33656-4 Male Pressure Port
PX6000L1-200AI 200 psi Absolute Pressure transducer with 4-20 mA output, PT1H-10-6P electrical connection and MS33656-4 Male Pressure Port
PX6000L1-300AI 300 psi Absolute Pressure transducer with 4-20 mA output, PT1H-10-6P electrical connection and MS33656-4 Male Pressure Port
PX6000L1-015GI 15 psi Gage Pressure transducer with 4-20 mA output, PT1H-10-6P electrical connection and MS33656-4 Male Pressure Port
PX6000L1-020GI 20 psi Gage Pressure transducer with 4-20 mA output, PT1H-10-6P electrical connection and MS33656-4 Male Pressure Port
PX6000L1-050GI 50 psi Gage Pressure transducer with 4-20 mA output, PT1H-10-6P electrical connection and MS33656-4 Male Pressure Port
PX6000L1-100GI 100 psi Gage Pressure transducer with 4-20 mA output, PT1H-10-6P electrical connection and MS33656-4 Male Pressure Port
PX6000L1-200GI 200 psi Gage Pressure transducer with 4-20 mA output, PT1H-10-6P electrical connection and MS33656-4 Male Pressure Port
PX6000L1-300GI 300 psi Gage Pressure transducer with 4-20 mA output, PT1H-10-6P electrical connection and MS33656-4 Male Pressure Port
產品型號說明
(1) (2) (3) (4) (5) (6)
PX6000 -
Qty: Add To Shopping Cart
選項描述
(1) Pressure Port
選擇
A 代表 1/8-27 NPT Male
B 代表 1/8-27 NPT Female
C 代表 1/4-18 NPT Male
D 代表 1/4-18 NPT Female
L 代表 MS33656-4 Male
M 代表 MS33649-4 Female
(2) Electrical Connection
選擇
0 代表 2' (6m) cable (std) +2$/ft over 2'
1 代表 PT1H-10-6P Connector or equal (no charge) (mating connector not included)
3 代表 4-pin Eyelet Header (no charge)
(3) Range
選擇
30 代表 30 to 0 in-Hg (Vacuum only)
015 代表 0-15 psi
020 代表 0-20 psi
050 代表 0-50 psi
100 代表 0-100 psi
200 代表 0-200 psi
300 代表 0-300 psi
(4) Units
選擇
VAC 代表 Vacuum Model
G 代表 Gage Model
A 代表 Absolute Model
(5) Output
選擇
V 代表 mV/V Output
5T 代表 0 to 5 Vdc Output
I 代表 4 to 20mA Output
(6) Options
選擇
代表 No Options
-CAL11 代表 11 point NIST Calibration $250 adder
-xxFT 代表 Extra length of cable $2/ft over 3ft
PX6000L1-050GI壓力變送器 美國omega
